¿Cómo uso la característica Verificación de las Luces del Tráiler en FordPass?
On the Vehicle screen of FordPass®*, you can do a trailer light check for your turn signals, brake lights, reverse lights, and rear fog lamps. Use the steps below for more information.
Requirements
- You have a compatible F-150** added to FordPass.
- Your FordPass® Connect† modem is activated.
- Your vehicle's Connectivity Settings are enabled.
- Your vehicle's ignition is on and remains in Park (P).
- Your battery is in good status.
- All lights, including brake lights, blinkers, hazard lights, and exterior lights, are turned off.
- Your trailer must be electrically connected.
Trailer Light Check With FordPass
For details on how to use the Trailer Light Check feature in FordPass and what to do if you encounter any issues, select from the drop-down options below.
Conducting a Light Check
- Ingresa a la Aplicación FordPass.
- Go to the Vehicle screen.
- Select Trailer Light Check.
- Enter your vehicle, turn your ignition on, and leave your vehicle in Park (P).
- Exit your vehicle and stand to the rear to start the light check.
- Tap Start Check. The signal will go to the cloud and the Start button will show a spinner while the command is sent.
The Trailer Light Check is in progress when the "Light Sequence in Progress" pop-up appears.
Notas:
- The lights will sequence in the order shown on the modal. This will repeat five times.
- To end the light check at any time, select Stop Check. When the Stop command is sent, a loading spinner will be shown within the Stop Check button.
Once the Trailer Light Check is complete, you should see the "Light Sequences Complete" pop-up, with an option to restart the check. If you tap the Restart Check button, the light check sequence will begin again.
What to Do if a Light Check Fails
Follow the appropriate steps based on the error state you have experienced.
| Error | Próximos Pasos |
| Lights are unresponsive |
|
| The "Temporarily Unavailable" message appears | This message appears when there are system problems or when there is poor connectivity. Close FordPass and try again. |
| The "Check Error" message appears | During a light sequence request, the "Check Error" message will appear when a manual interruption is detected during a check. Try again. To avoid errors, do not make any adjustments to your vehicle while lights are sequencing. |
If you experience any issues, contact a Guide for additional assistance using the Account > Contact Help options in FordPass.
*La Aplicación FordPass®, compatible con ciertas plataformas para smartphone, está disponible para descargar. Se pueden aplicar tarifas por mensajes de texto y datos.
**La característica está disponible en ciertos vehículos. Las características pueden variar según el año del modelo, la versión, las opciones, los paquetes y la disponibilidad de suministros. Usa la herramienta Diseña y Cotiza para consultar la disponibilidad de la característica en los modelos actuales. Si tienes preguntas o necesitas más información, consulta tu Manual del Propietario o comunícate con tu Concesionario Ford.
†FordPass® Connect, the FordPass® App., and complimentary Connected Service are required for remote features (see los Términos de FordPass para obtener detalles). Los servicios conectados y las características dependen de la disponibilidad de la red de AT&T compatible. La tecnología que evoluciona/red móvil/capacidad del vehículo pueden limitar la funcionalidad e impedir el funcionamiento de las características conectadas. Connected service excludes Wi-Fi® hotspot.