¿Qué es Trail Control de la Ford Bronco?
Available only with Ford Bronco™ models with automatic transmissions, Trail Control™ provides the kind of convenience once reserved for highway driving. It allows you to set your speed when tackling off-road trails so you can focus the adventure in front of you.
What's more, this amazing technology can easily detect and respond to both subtle and abrupt changes in trail conditions, providing confidence-inspiring precision when scaling steep hills or crawling over rugged terrain.*
How to Use Bronco Trail Control
When you're ready to take on the great outdoors, just press the Trail Control button located on the center console G.O.A.T. Modes™ (Goes Over Any Type of Terrain) dial.
How to Set Bronco Trail Control Speed
Similar to cruise control, Trail Control is engaged by buttons on your steering wheel. To engage the system, simply:
- Drive to preferred speed
- Select SET + to increase the set current speed
- Select SET - to decrease the set current speed
- The set speed can also be adjusted by braking
When Is Bronco Trail Control Not Available?
Trail Control is unavailable when any of the following occur:
- The vehicle speed is greater than 20 mph (32 km/h) in 2WD High or 4WD High modes
- The vehicle speed is greater than 9 mph (15 km/h) in 4WD Low mode
- The vehicle speed is greater than 3 mph (5 km/h) in Reverse (R)
- The transmission is in Park (P)
- The driver’s side door is open, or the driver's safety belt is off when the driver’s side door is removed
- Cruise control is on
What Is Class-Exclusive** Trail 1-Pedal Drive?
Simplicity of use on the trail was paramount in the creation of the Ford Bronco SUV. So much so that the engineers even made braking and accelerating easier thanks to Trail 1-Pedal Drive, available exclusively on Bronco models with the 2.7-liter engine.
How Does Trail 1-Pedal Drive Work?
The name says it all. The performance speaks volumes. When it's engaged, you only have to use one pedal (the accelerator) to control the speed of the vehicle. As you ease off the accelerator pedal, the brakes engage. Releasing the accelerator completely will bring your Bronco SUV to a controlled stop.
How to Turn Trail 1-Pedal Drive On and Off
Whether you're starting from any G.O.A.T. Modes or from Trail Control, engaging Trail 1-Pedal Drive is easy:
- To activate the feature, just press the trail features button located in the center of the G.O.A.T. Modes dial when you're in either 4WD High or 4WD Low
- When using Trail Control in 4WD High or 4WD Low modes, you can switch to Trail 1-Pedal Drive by pressing the CAN button on the steering wheel
- Press the trail features button located in the center of the G.O.A.T. Modes dial again to switch Trail 1-Pedal Drive off
When to Not Use Trail 1-Pedal Drive
Trail 1-Pedal Drive is unavailable when any of the following occur:
- The vehicle is not in 4WD High or 4WD Low
- Cruise Control or Trail Control is engaged
- Vehicle speed exceeds 30 mph (48 km/h)
- Releasing the accelerator pedal may not bring the vehicle to a complete stop on steep grades
Trail Control and Trail 1-Pedal Drive Troubleshooting
If a problem is detected, messages will appear on the instrument panel. They may help guide you through the steps needed to address the problem. Specific messages and corresponding actions can be found in the Owner's Manual.
*Siempre consulta el Manual del Propietario antes de conducir en superficies todo terreno. Además, estudia el terreno y sus dificultades y utiliza equipos de seguridad apropiados.
**La Clase es Utilitario Tradicional Mediano.
Trail 1-Pedal Drive es una asistencia de manejo adicional. No reemplaza la atención y el criterio del conductor ni la necesidad de aplicar los frenos. Consulta el Manual del Propietario para ver los detalles y las limitaciones.